How do I clean the body of the Pyroclassic and the outer surface of the flue pipes?
The powder coated panels on the Pyroclassic IV can be wiped clean with some light detergent and warm water. You can choose to do this with the panels on the fire or remove them for a more thorough cleaning. Be careful when you remove the front panel to not tear the insulating gasket which is on the inside of the panel: you will need to pull the centre of the panel forward slightly to allow it to clear the space behind it when you slide it up.
The stainless steel flue pipe can be cleaned using a soft cloth with a small amount of methylated spirits soaked into it. Try to avoid touching the flue pipe with your bare hands as this leaves oils from the skin on the pipe and becomes very hard to remove once the pipes have been heat cycled.