Refuelling onto a low firebed

The wood fuel inside a Pyroclassic® IV fire burns best on a thin bed of ash and hot coals. However, if there is insufficient burning material in the fire bed to light a new fuel charge, excessive smoke emission can occur. Refueling must be carried out onto a sufficient quantity of glowing embers and ash so that the new fuel charge will ignite in a reasonable period, add suitable kindling if necessary. If a new fuel load is left without suitable ignition then a buildup of unburnt volatile gases can occur, this can cause the unit to be put under stress when these gases eventually do combust causing a possible internal explosion. Always ensure adequate combustion and ignition of fuel and use the Turboslide as instructed.